AVAILABLE IN GLOSS WALNUT
Send in a digital signal (wired or wireless, it’s your choice), and it’ll stay that way right up until the last possible moment – meaning it stays pure all the way from the recording studio to the speaker driver.
There’s no clutter, no fuss… and no catch.
Running the show is cutting-edge digital processing technology capable of handling full-fat, 24-bit/192kHz hi-res files.
All the speakers in the range share common controls and connections – so if you want to mix-and-match different models from the range, you can. There’s digital coaxial in and out, plus analogue input (with adjustable sensitivity), as well as a seven-position control for fine-tuning the speakers’ placement in your room.
And if you add the Dynaudio Connect box, you get digital optical, another digital coaxial and RCA and 3.5mm analogue inputs – plus mini-USB (which can stream 24-bit/96kHz files), aptX Bluetooth and Wi-Fi connectivity (including DLNA).
The Focus XD’s firmware can even be upgraded when our engineers have another Eureka! moment (they get them a lot). In fact, that’s exactly what’s just happened. In the 2017 version, not only have they redesigned the crossovers and found a way to use less processing (for even cleaner reproduction), they’ve managed to extract more volume from the drivers without distortion or compression. And because there’s less processing happening there, we’ve been able to use more in the EQ for even better speaker-position compensation. We’ve also included tech from our LYD pro-studio monitors that lets you tweak overall brightness with a switch on the back.
Use them with your existing system (they’ll integrate just fine), build a multiroom set-up (you can use them with the Xeo range too), or even hook them up to your TV… while getting genuine high-end wireless hi-fi into the bargain.
Specification sheet for Focus XD part 2
Analogue Inputs: 1 x RCA per speaker
Digital Inputs/Outputs: 1 x RCA input 1 x RCA output
Wireless: Accepts up to 24bit / 96kHz (Connect Box)
Frequency Response (±3dB): 29Hz - 24kHz
Box Principle: Bass Reflex Rear Ported
Crossover: 2½ way DSP Based
Crossover Frequencies: (300), 4000Hz
Woofer: 17cm MSP
Midrange: 17cm MSP
Tweeter: 28mm soft dome
Specification sheet for Focus XD part 1
Amplifier Power: 3 x 150W
AC Power Input: 100-240 V 50/60Hz
Standby Power Consumption: < 0.5W
Maximum Power Consumption: 200W
Weight: 18,5kg / 40lb
Dimensions (W x H x D): 198 x 980 x 307mm
7.8 x 38.6 x 12.1in
Dimensions with feet/grill (W x H x D): 256 x 998 x 328mm
10.1 x 39.3 x 12.9in